High Temp Paint on Exhaust

For those who are thinking of painting your exhaust with high temp paint, you might want to NOT consider this…. Bought a cheap can of high temp paint. Looked good for awhile, then started turning WHITE??!?

Maybe because this was rated 1200F. I think Rustoleum has one that’s rated 2000F. Might try that sometime.

Was wondering how Rustoleum’s VHT paint on the exhaust will work out?

12932730_10153896164790783_1347133614109537993_n  12938227_10153896164780783_971732040214915844_n


Update 10Apr: Okay, so I got myself a can of Rustoleum. It’s rated 2000F. Prepped my bike and prepared for the spray…

IMG_5750

IMG_5751

 


Update 01May: After running about 2,000km after the Rustoleum was applied, the exhaust header still looked BLACK! Of course, dirt has started accumulating and it’s looking “used” – more grey than dark black, but I’m happy it’s not turning white like the previous product. So definitely THUMBS UP for Rustoleum!

 

12 thoughts on “High Temp Paint on Exhaust”

    1. Well, I would neither recommend nor not recommend it. I think all paints don’t hold up indefinitely on the exhaust headers. It doesn’t peel – which is a good thing. But with the constant exposure to high heat and water & dirt spray from the roads, I figured that there’s no way keep the headers looking new. Yes, since I have quite a full spray can, I do occasionally re-coat it when I have the time and feel like doing it. 🙂

    2. At least the Rustoleum stays black (more like very dark grey) instead of turning white like my previous “high temp” paint. So most parts of the exhaust is still blackish. Rust has started to creep in in some areas though. And when I find the time, I’ll re-coat it again soon.

        1. No. Please, no. I know of someone (though not personally) who tried blue – because his bike was blue, and he regretted it almost immediately after. Hahah.

        1. Yes I did – although not quite to the T. I did warm it up and allowed it cool several times before going on a proper ride.

  1. May I know where I can get the rust-oleum high heat paint ?
    I found it online which cost me about 21 dollar. Just thinking any cheaper source.

    1. I bought it from one of those DIY stores – can’t recall if it was HomeFix, HomeDIY, Self Fix or something like that.

    1. LOL! That said, I’m pretty sure you’ll love the results…. If you’re coating this for the first time, make sure you lightly sand down the existing layer of oxidation, wash it clean to get rid of loose contaminants before paint application.

      Personally, I prefer to paint the heat shield silver instead of the default black. You might wanna consider that too….

      Pics here: http://sgbikerboy.com/2017/03/15/detailing-the-200ns-exhaust/

Leave a Reply to D Cancel reply

Your email address will not be published. Required fields are marked *