Bajaj Pulsar 200NS DIY Maintenance Guide

I’ve received many requests for information on how to perform some DIY maintenance on the Pulsar 200NS. In this Bajaj Pulsar 200NS DIY Maintenance Guide, you’ll learn the following:

  1. Fuel tank cover removal.
  2. Fuel tank removal.
  3. Air filter replacement.
  4. Coolant replacement.

Some of the tools required:

  • 8mm, 10mm and 12mm hex sockets
  • Hex bit set
  • Phillips-head (+ shaped) screwdriver
  • Long-nose pliers

Continue reading “Bajaj Pulsar 200NS DIY Maintenance Guide”

Weekend Project #1 – Replacing lime juice with grape juice

As I had purchased my 200NS pre-owned, I really wasn’t sure if the previous owner had ever replaced the coolant. When I adopted the Indian machine, she was over 2 years old. Back then, the odometer reflected approximately 24,000km of adventure. And since Bajaj’s manual calls for a coolant replacement every 30,000km or 2 years – whichever comes first, I figured that there will be a good chance that my mechanical steed is still carrying the same coolant that it was fed from the factory. 

And so I did some research and narrowed my choices to one of these 3 coolants – Evan’s Waterless Coolant, Engine Ice and Maxima’s Cool-Aide. So, the cheapo in me  Continue reading “Weekend Project #1 – Replacing lime juice with grape juice”